Reliable Lifting. Built for Heavy-Duty Applications
Since 1993, we are a leading TEFC Motors Manufacturer, Supplier, Exporter and Dealer in Nashik, in India, offering robust and high performance motors designed for demanding crane and material handling applications.
Our TEFC Motors are built to withstand frequent starts, stops, reversing operations, shock loads, and continuous heavy-duty performance. They deliver high starting torque, reliable operation, and long service life in the toughest industrial environments.
Get a Quote
Altra Power Electrical industries as reputed TEFC Motor manufacturers in India can provide a wide range of high performance TEFC electric motors, which are designed to provide reliability, longevity and efficiency in the harsh industrial conditions. TEFC motors are now the preferred choice of the modern industries where continuous operation and safety of the equipment is an essential factor since their construction is quite strong and they can work effectively during the most severe conditions.
A Totally Enclosed Fan Cooled (TEFC) motor is specifically made to be used in the environment that has dust, moisture, dirt, and other contaminants. As compared to open-type motors, TEFC motors have an entirely sealed enclosure that does not allow any external air to access the inner parts. Rather than depending on the inherent movement of air inside the motor, they use an external mounted fan, which blows air around the outer side of the motor, which allows the device to cool the heat and keep a clean motor interior.
The special design ensures that TEFC motors are very suitable in the manufacturing, processing, material handling, cement and steel industry and other industries where reliability and service life are paramount like in the agricultural industry.
External cooling fins are frequently blocked with industrial dust or debris to form a thermal blanket. This accumulation does not allow the smooth cooling of heat and internal parts may become hot enough to cause damage to other components despite the cooling fan seemingly operating at its best level.
The built in cooling system also decelerates when the motor is being operated at lower speeds through a drive. This greatly cuts off the air flow resulting in rapid heat buildup and insulation burnout due to the inability of the unit to expel heat at a rate equal to the rate or greater than the rate at which it produces heat.
Change in temperature will lead to expansion and contraction of the internal air that will attract atmospheric humidity. The result of this breathing process is internal condensation and sweating which ultimately results in rust, bearing corrosion and electrical shorts unless the unit is drained properly.
Excessive greasing usually causes the lubricants to push inside the internal seals and into the delicate electrical windings. This is contamination coupled with high operations heat that results in hardening and degradation of the grease resulting in unforeseen mechanical seizures and expensive system downtimes.
Altra Power Electrical Industries is Top TEFC Motor Suppliers in India and therefore provides the smooth supply of high quality motors in various applications in industries. We know that the timely supply is very important to ensure a continuous flow of operation, this is why we pay attention to effective inventory management and quick dispatch systems.
Our supply potential is aimed at serving both small and large industries, starting with small workshops and ending with large manufacturing factories. Regardless of whether you need an off the shelf model or a tailored-made kind, we will see to it that each motor provided to you will be of high quality and performance.
What You Can Expect from Our Supply Network:
Having high concern over reliability and customer satisfaction, we make sure that your operations are never delayed by the unavailability of motors.
A TEFC motor ( Totally Enclosed Fan Cooled motor ) is an electric motor that incorporates an entirely enclosed motor housing to allow no free interchange of air between the internal motor contents and the outside world. The enclosure safeguards the windings, bearings, and other important elements of the motor against dust, dirt and other contaminants like moisture and industrial debris.
The outstanding characteristic of a TEFC motor is its external cooling system. Rather than a draw of air into the motor a fan is placed on the motor shaft to blow air over the outer face of the motor frame. The frame is normally built in such a way that it has cooling fins that enhance the surface area, where the heat can dissipate easily.
Such sealed construction and external cooling guarantee:
TEFC motors have a wide application in indoor and outdoor areas, and in areas where exposure to contaminants may corrupt the normal motors.
We have a large number of Reliable TEFC Motor Dealers in India that enable the customers to reach our products and services in many regions. The dealers play an important role by connecting the manufacturer with the end user and not only do they offer the availability of the product, they also offer helpful technical support.
At Altra Power Electrical industries, we deal with our dealer partners to make sure that the customers get the appropriate product as well as guidance on how to select and use the product.
We have dealers who are trained to know what you are needed to do in the industry and thus you are provided with the solutions that match your application.
A TEFC motor works on the principle that it takes the functionality of a normal electric motor and adds a high-tech exterior cooling system. On the inside, the motor is run through the electromagnetic principles of other induction motors. The main difference however is the way it handles heat.
With the motor in power, the magnetic fields inside the stator and the rotor interact and change electrical energy into mechanical energy. In the process, the heat is produced because of the electrical resistance and mechanical friction.
In a TEFC motor:
The motor is not exposed to contaminants because of the absence of direct airflow through the internal components. This is an indirect means of cooling, which means that the motor will still be reliable even when in a dusty or humid climate.
Most of the TEFC motors are widely used in the industry because of the many benefits they bring to the industry compared to the other traditional designs of motors. Among the main advantages, it is possible to note that they can be used in the work under the conditions in which dust, moisture, and contaminants can be found.
Regarding safety, TEFC motors have greater protection against environmental risks, minimizing the chances of electrical failures and making operation safe.
Even though TEFC motors have many advantages, one should be aware of its limitations to make the right choice and use it. Their initial cost is one of the primary factors as it is usually higher than that of open-type motors because of the high level of their construction and protective measures.
The other weakness is that it relies on outside air to cool down. When the air flow surrounding the motor is limited or when the fan is blocked, then the cooling efficiency might be limited which can cause overheating.
TEFC motors are also not the most suitable where very high temperatures are involved unless further cooling is applied. When this happens then specialized motor designs can be necessary.
In spite of these, TEFC motors are still the most preferred in most industrial applications based on their general reliability and durability.
| Parameter | Specification |
|---|---|
| Motor Type | Totally Enclosed Fan Cooled (TEFC) |
| Power Rating | 0.37 kW to 3.7 kW |
| Phase | Single Phase / Three Phase |
| Voltage | 220V, 230V, 240V, 380V, 400V, 415V, 440V |
| Frequency | 50 Hz / 60 Hz |
| Pole Configuration | 2 Pole / 4 Pole / 6 Pole / 8 Pole |
| Speed Range | 750 RPM to 3000 RPM |
| Frame Material | Cast Iron / Aluminum / Steel |
| Enclosure Protection | IP55 / IP56 |
| Cooling Method | External Fan Cooled |
| Insulation Class | B / F / H |
| Duty Type | S1 Continuous Duty |
| Mounting Type | Foot Mounted / Flange Mounted |
| Shaft Material | Carbon Steel / Stainless Steel |
| Bearing Type | Ball Bearing / Roller Bearing |
| Ambient Temperature | Up to 50°C |
| Efficiency Class | IE1 / IE2 / IE3 |
| Rotation | Clockwise / Anti-clockwise |
| Application | Pumps, Conveyors, Compressors, Fans, Industrial Machin |
TEFC motor construction has a major effect in its operation and longevity. These motors come in various frame materials and each one of them has certain benefits.
To make the appropriate choice of TEFC motor, it is necessary to define power, speed, and configuration. The rate of power is what defines the ability of the motor to manage load and pole configuration influences speed and torque.
As an illustration, a 2-pole motor works with high speed and is applicable in use in such activities as fans and blowers. The most common motor is a 4-pole motor which provides a trade-off between speed and torque. The 6 or 8 pole motors are less speedy than the 2 poles and offer higher torque thus they are suitable in heavy duty applications like conveyors and crushers.
Single phase or three phase motors are based on the availability of power supply and the type of application. Industrial applications of three-phase motors are mostly favored because it is efficient and has smooth operations.
Altra Power Electrical Industries as Trusted TEFC Motor Exporters In India provides international customers in different industries with high-performance motors. We have anchored our export business on the value of quality assurance, punctuality, and international norms.
We realize the relevance of consistency and reliability in international trade, and that is why all of our motors will be thoroughly checked and checked in terms of quality prior to shipment. Our packaging and logistics operations are meant to deliver safely even over a long distance.
Our Export Strengths Include:
As we expand our global base, we have a commitment to provide Indian manufacturing excellence to our customers across the world.
The right TEFC motor choice is important in terms of performance and efficiency. The procedure requires consideration of a number of factors, such as the requirements of the application, load capacity, the environment in which it operates as well as its power supply.
One can also ensure that the power rating of the motor is somewhat greater than the needed load in order to avoid overloading. The pole configuration must correspond to the manner in which the speed is required and the motor must be suitable to the available voltage and phase.
Dust, moisture, and temperature are also environmental conditions, which should be taken into consideration and affect the selection of protection rating and construction material. Experienced manufacturers can be consulted to assist in choosing the best motor to be used in certain applications.
The selection of an appropriate manufacturer is important in the quality and reliability of industrial motors. Altra Power Electrical industries is also characterized by its dedication to excellence as it provides a large selection of TEFC motors with the aim of satisfying the utmost standards.
Our supply capabilities are designed to support precision engineering, quality materials and strict testing and providing products that will work faithfully under extreme conditions. Its pricing is competitive, customizations solutions are available, and the technical expertise is excellent, which gives full support to its customers in all industries.
Altra Power Electrical Industries is your reliable partner in case you are seeking durable, efficient, and high-performance TEFC motors. We assist industries to realize smooth and effective operations with a wide variety of options, technical expertise, and efficient service.
Contact us now and tell us about your needs, and get the most effective solutions to suit your needs.
KEY FEATURES
High starting and pull-out torque for powerful and reliable lifting operations.
Designed for demanding applications requiring frequent starting, stopping and reversing.
Rugged cast iron construction provides excellent strength, durability and reliable performance.
High overload capacity allows the motor to handle heavy loads and demanding operating conditions.
Low maintenance requirements ensure dependable operation and extended service life.
Smooth and reliable performance ensures stable operation in demanding crane applications.
Energy-efficient design helps reduce power consumption and operating costs.
Flexible mounting options are available to suit different crane applications and installation requirements.