Precision Motion, Proven Performance
Since 1993, we are a leading DC Electric Motors, Direct Current Electric Motors, Manufacturer, Supplier, Exporter and Dealer in Nashik, India, offering robust and high performance motors designed for demanding crane and material handling applications.
Our DC Electric Motors are built to withstand frequent starts, stops, reversing operations, shock loads, and continuous heavy-duty performance. They deliver high starting torque, reliable operation, and long service life in the toughest industrial environments.
Get a Quote
Altra Power Electrical Industries is one of the top DC Motor Manufacturers in India who are determined to provide high-performance, reliable and efficient solutions to industrial, commercial and consumer needs. DC motors are essential elements in innumerable machines in that they transform direct current (DC) electrical power into mechanical motion. They work on the principle that when a current carrying conductor is in a magnetic field, the conductor is subjected to Lorentz force that causes rotational motion.
This is a single but effective principle, which is used in domestic appliances as well as industrial machines and electric cars. The proper selection of the DC motor can maximize efficiency, enhance the performance of the machine, and increase the life of your equipment. We are out to offer quality motors, as well as practical advice, to enable our customers to make the right choice of motor to use depending on their needs.
Intermittent speed is often associated with the failure in the communication between the motor and its control system. When the feedback devices, e.g. encoders or tachometers, are loose, dirty or incorrectly aligned, the feedback data is sent to the controller as noisy so it attempts to over-correct resulting in jerky motion or speed hunting. Under mechanical, intermittent power supply through uneven wear on the rotating electrical interface may also result in a noticeable decrease in RPM or torque.
Internal contamination or inadequacy of airflow are some of the causes leading to overheating. Dust and oil that have accumulated will serve as an insulation that will trap heat in the housing. Also, plugged vents or leakage of electric energy through the windings may create more than the capacity of the cooling system thus causing possible failure of the motor.
Sparking is usually because of dirty or worn internal contacts. In case these components lose correct tension or are not distributed evenly, they generate electrical arcs which may destroy internal surfaces. This friction-related arcing should be prevented by cleaning and replacing contact brushes on time to make sure that electrical transfer proceeds with no problems.
Once a motor starts vibrating or making some grinding sounds, it is almost always mechanical misalignment or component fatigue. The most prevalent culprits are bearings; this may fail because of over-greasing, under-greasing or even because of the entry of the contaminants. But also, it is essential to ensure that the alignment between the motor shaft and the driven equipment is checked. A small imbalance will cause huge radial pressures on the interior elements, resulting in a loud buzzing or rhythmic vibration which ultimately results in complete mechanical failure.
Altra Power Electrical Industries as a Top DC Motor Suppliers in India provides a good variation of high-quality DC motors in industries, commercial and consumer purposes. We have motors that are built to be reliable, efficient and long lasting in performance, which are applicable in machinery, automation systems and electronics.
Our range of motors is in different voltages, speeds, types and power ratings and there is no doubt that you will get a perfect solution to your own needs. Our company of professionals helps the customers to choose the appropriate motor, providing technical advice to achieve the best performance.
By selecting Altra power electrical industries as your supplier of DC motor, you will end up with a supplier that you can rely on, one with good customer service and prompt delivery hence making us the best choice of suppliers of engineers, manufacturers and businesses in India.
To make the best selection of the type of DC motor to use, it is necessary to understand the working of a DC motor. The motor is fundamentally made up of a stator which produces a magnetic field and rotor (armature) which conducts current. As the current is flowing through the rotor windings, it acts upon the magnetic field of the stator, and a force is produced which results in torque. This torque spins the motor shaft transforming electrical energy into mechanical movement.
The rotor has a commutator that reverses the current direction whenever the rotor turns a half-step so that the rotor may proceed spinning in the same direction. Meanwhile, the brushes are holding electrical contact between the moving and stationary parts of the machine, such that a continuous flow of current is possible. This mix of elements enables DC motors to provide accuracy of speed control, high starting torque and uniform performance over a large application range.
In recent usage, brushless DC motors (BLDC) are used in place of mechanical brushes, using electronic controllers instead, and this lowers the maintenance cost, as well as enhancing efficiency and life cycle. In industries where reliability and low maintenance are of great concern, BLDC motors are becoming more popular.
Altra Power Electrical Industries as a Reliable DC Motor Dealers in India, offers a wide variety of Motors supported by sound technical knowledge and outstanding customer service in case of the businesses and industries that can be able to rely on the dealers of DC motors in India.
Our dealerships are located in such a way that there is an easy availability of different types of motors, their configurations and power ratings to suit the particular requirements of the manufacturers, industrial plants and automation sources. Our team is in close contact with the customers in order to suggest the appropriate motor solution and offer after sales services to operate without problems.
All DC motors, of any kind, depend on a limited number of basic elements which combine to produce rotation:
The combination of these elements constitutes a motor that can transform electrical energy into the controlled motion of the mechanism. The knowledge of the role of each component can enable the customers to choose motors that suit their operations.
There are various types of DC motors which are applicable in various industrial and commercial applications. Knowledge of the disparities can assist the customers in selecting the most appropriate solution:
The selection of the appropriate DC motor is based on the important specifications that determine the performance, compatibility, and efficiency. These specifications can be arranged in a table that is user-friendly and descriptive as shown below:
| Specification | Description |
|---|---|
| Rated Voltage | DC motors are available in 3.7V, 5V, 6V, 12V, 24V, 48V, and 220V. Low-voltage motors are commonly used for robotics, electronics, and small devices, while high-voltage motors are ideal for industrial machinery, automotive systems, and larger equipment. |
| Rated Speed (RPM) | Speed options range from 10 RPM to 3000 RPM. Low RPM motors provide high torque, ideal for heavy load applications, while higher RPM motors are suitable for fast-moving equipment and high-speed machinery. |
| Motor Configuration | Geared motors increase torque and reduce speed for load-heavy applications. Non-geared motors deliver direct speed and are used when efficiency and compactness are priorities. |
| Motor Type | Motor types include brushed, BLDC, PMDC, shunt wound, series, compound, stepper, and servo. Each type offers unique advantages tailored to specific performance requirements and industrial use cases. |
| Rated Power | Motors range from 100 W, 200 W, 0.5 HP, 1 HP, 2 HP, to 5 HP. Higher power motors support industrial and automotive applications, whereas lower power motors suit small appliances and electronics. |
| Shaft Diameter | Shaft diameters range from 2 mm to 10 mm, providing compatibility with couplings, pulleys, and gear systems for different mechanical setups. |
This table will allow the customers to be able to compare and select motors without any complications according to their operation demands. It can be extensively used particularly among the engineers, industrial purchasers and technical decision-makers who need to have precise specifications.
The ability of the DC motors to provide controlled torque and motion has enabled it to be highly versatile and applicable in numerous industries.
The use of these applications shows that Altra Power Electrical Industries is able to show the flexibility of its motors and align its products to the applications of its products to real-life industrial and commercial applications.
Altra Power Electrical Industries is one of the reputable DC Motors Exporters in India, which provides the highest quality of the motors to its customers across the globe. Our export products serve various markets such as industrial automation, robotics, automotive and medical equipment.
We uphold high standards of quality so that all the motors are based on the international standards and can work reliably in the global operations. Our efficient logistical system, prompt shipping and customer care provide businesses in all parts of the globe with high-performance DC motors.
Working with Altra Power Electrical Industries as your DC motor exporter would not only ensure that you have high-quality products, it will also guarantee you have a smooth supply chain and highly qualified technical support in order to maintain smooth and efficient running of your projects.
Altra Power Electrical Industries has ensured that it is a reliable DC motor manufacturer through innovation, quality, and reliability. Our motors are made to offer high efficiency, durability, and accuracy to suit a large market of the industrial, commercial, and consumer consumers.
We have tailor-made products to satisfy individual operational needs, be it a high speed BLDC motor or a series motor with a high torque or a low voltage PMDC motor. All the motors are thoroughly tested in terms of quality so that it can be assured that they will perform long, require minimum maintenance and be reliable in the performance.
We also have a group of specialists who give technical advice and assistance to customers to make the right choice of motor to use. This will guarantee that every customer is provided with an optimized solution in terms of efficiency, productivity and operational life.
The choice of DC motor is important to achieve maximum efficiency, performance of the machinery, and reduce the time of breakdown. The types of DC motors sold by Altra Power Electrical Industries include brushed, brushless, PMDC, series, shunt, compound, stepper motors as well as servo motors. The motors are designed to satisfy the needs of modern industrial and commercial use.
Get to know our products and get in touch with our technical team to find the perfect DC motor solution to your machinery, robotics or automation application. Given Altra Power Electrical industries, you do not just buy a motor but an associate who believes in quality, innovation and performance.
KEY FEATURES
High starting and pull-out torque for powerful and reliable lifting operations.
Designed for demanding applications requiring frequent starting, stopping and reversing.
Rugged cast iron construction provides excellent strength, durability and reliable performance.
High overload capacity allows the motor to handle heavy loads and demanding operating conditions.
Low maintenance requirements ensure dependable operation and extended service life.
Smooth and reliable performance ensures stable operation in demanding crane applications.
Energy-efficient design helps reduce power consumption and operating costs.
Flexible mounting options are available to suit different crane applications and installation requirements.